220TE tree shear for tractor forest cranes

221TE TREE SHEAR FOR TRACTOR FOREST CRANES AND FOREST MACHINES

221TE tree shear is equipped with strong guillotine cutting and delimbing blades. Also its loading capacity is really good

  • 221 MODEL REPLACED THE OLDER 220 MODEL IN YEAR 2025.
    The biggest differences and improvements are:
  • Updated hydraulics allows faster movements
  • Stronger cutting knife frames makes possible to use of different knives and it allows easier cutting
  • Double bearings of the blade frames reduces friction and surface pressure, and this increases the service life of bearings
  • Limit switch valve ensures a better grapple compression and prevents guillotine knives moving when loading full handfuls
  • Hydraulic hoses are simpler and better protected than in the old model
Farmikko connected to different machines

TECHNICAL DATA

  • Weight: 175 kg
  • Cutting diameter: 220 mm (hard wood species such as oak, beech, etc. about 25% less)
  • Pressure booster to increase cutting force: yes
  • Recommended oil flow: 20-60 l/min
  • Recommended operating pressure: 170 – 200 bar
  • Multi tree handling: No
  • For cranes over 6.5 meters (30-65 kNm)
  • Installed freely hanging on the rotator

FEATURES

  • Wireless electric control for tilt function
  • Strong and fast guillotine
  • Tree delimb
  • Also excellent as a loading grapple
  • No additional hydraulics or electrical cables required
  • No hoses or electrical cables limiting the grapple’s rotation
  • Quick and easy installation
  • Made of Hardox steel
ASK ABOUT PRODUCTS

221TE TREE SHEAR

The 221TE is intended for use in cranes over 6.5 meters reach.
 
Strong and fast guillotine with two knife blades cuts a maximum of 22 cm.
 
The opening of the grapple is 82 cm and its geometry is excellent for loading. The guillotine blades are always automatically protected in their housing during loading, so loading is as easy as with a normal wood grapple.
 
221TE is equipped with a wireless controlled electric tilt. This ensures that the tree shear never tilts accidentally while the tree is still being cut. When loading trees, a significant advantage of the electric tilt is that the grapple can also be turned from a horizontal position to a vertical position. Moving wood materials vertically requires less working space and speeds up the work significantly.
 
The 221TE is equipped with a delimb blades, allowing the tree delimb using the lifting motion of the crane.
 
The 221TE is easy to install. The tree shear is attached to the rotator of the forest crane and 2pcs hydraulic hoses are connected just like installing a normal timber grapple. Tree shear already has a wireless receiver for the tilt function pre-installed at the factory. Only the wireless transmitter/micro switch is brought into the machine cabin and the micro switch controls the tilt function.
 
The most common machines for the 221TE are: Forest machines and tractors forest cranes over 6.5 meter reach