Small tree shear with collector, recommended for mini forwarders and small forest cranes

201TCE TREE SHEAR FOR SMALL TRACTOR FOREST CRANES AND MINI FOREST MACHINES

The lightest model on the market equipped with wireless electric control, multi tree handling and delimb blades. Its cutting power is sufficient for the most common Scandinavian 20cm trees.

  • 201 MODEL REPLACED THE OLDER 200 MODEL IN YEAR 2025.
    The biggest differences and improvements are:
  • Updated hydraulics allows faster movements
  • Stronger cutting knife frames makes possible to use of different knives and it allows easier cutting
  • Limit switch valve ensures a better grapple compression and prevents guillotine knives moving when loading full handfuls
  • Hydraulic hoses are simpler and better protected than in the old model
Forest machines and tractors and trucks

TECHNICAL DATA

  • Weight: 155 kg
  • Cutting diameter: 200 mm (hard wood species such as oak, beech, etc. about 25% less)
  • Recommended oil flow 20-60 l/min
  • Recommended operating pressure: 170 – 200 bar
  • Multi tree handling: yes
  • For cranes under 6.5 meters (15-40 kNm)
  • Installed freely hanging on the rotator

FEATURES

  • Wireless electric control for the tilt function
  • Multi tree handling increases productivity
  • Strong and fast guillotine
  • Tree delimb
  • Also excellent as a loading grapple
  • No additional hydraulics or electrical cables required, easy to install
  • No hoses or electrical cables limiting the grapple’s rotation
  • Made of Hardox material
ASK ABOUT PRODUCTS

201TCE IS MOST EFFICIENT TREE SHEAR FOR SMALL FOREST CRANES

This model is ideal for installation on the smallest forest loaders (reach less than 6.5 meters), where the machine can be for example a small forestry machine or a tractor.
 
Automatic collector / multi tree handling. Operates with two collection jaws that firmly grip the collected trees, making the collection precise. The collector jaws move automatically thanks to the internal hydraulic control of the tree shear. User does not need to make separate control movements to perform the collection functions.
 
Strong and fast guillotine with two knife blades cuts a maximum of 20 cm
 
The opening of the grapple is 82 cm and its geometry is excellent for loading. The guillotine blades are always automatically protected in their housing during loading, so loading is as easy as with a normal wood grapple.
 
201TCE is equipped with a wireless controlled electric tilt. This ensures that the tree shear never tilts accidentally while the tree is still being cut. When loading trees, a significant advantage of the electric tilt is that the grapple can also be turned from a horizontal position to a vertical position. Moving wood materials vertically requires less working space and speeds up the work significantly.
 
The 201TCE is equipped with a delimb blades, allowing the tree delimb using the lifting motion of the crane.
 
The 201TCE is easy to install. The tree shear is attached to the rotator of the forest crane and 2pcs hydraulic hoses are connected just like installing a normal timber grapple. Tree shear already has a wireless receiver for the tilt function pre-installed at the factory. Only the wireless transmitter/micro switch is brought into the machine cabin and the micro switch controls the tilt function. It is noteworthy that electrical cables no need to the crane boom..
 
The movements of the tree shear are only driven by the hydraulics to close and open, just like when using a normal wood grapple. The internal hydraulic control of the tree shear automatically carries out the movements in the correct order.
 
The most common machines for the 201TCE are: Mini forest machines and tractors forest cranes under 6.5 meter reach