Light weight energy grapple

201TE IS LIGHT WEIGHT TREE SHEAR FOR SMALL FOREST CRANES

201TE is equipped with wireless electric tilt control and strong guillotine cutting. Its loading capacity is very good

  • 201 MODEL REPLACED THE OLDER 200 MODEL IN YEAR 2025.
    The biggest differences and improvements are:
  • Updated hydraulics allows faster movements
  • Stronger cutting knife frames makes possible to use of different knives and it allows easier cutting
  • Limit switch valve ensures a better grapple compression and prevents guillotine knives moving when loading full handfuls
  • Hydraulic hoses are simpler and better protected than in the old model
different machines with forest cranes

TECHNICAL DATA

  • Weight: 130 kg
  • Cutting diameter: 200 mm (hard wood species such as oak, beech, etc. about 25% less)
  • Recommended oil flow: 20-60 L / min
  • Recommended operating pressure: 170-200 bar
  • Multi tree handling: No
  • For cranes under 6.5 meters (15-40 kNm)
  • Installed freely hanging on the rotator

FEATURES

  • Wireless electric control for tilt function
  • Strong and fast guillotine
  • Tree delimb
  • Also excellent as a loading grapple
  • No additional hydraulics or electrical cables required
  • No hoses or electrical cables limiting the grapple’s rotation
  • Quick and easy installation
  • Made of Hardox steel
ASK ABOUT PRODUCT

201TE TREE SHEAR IS DESIGNED TO USE IN SMALLER FOREST CRANES

This model is ideal for installation on the smallest forest loaders (reach less than 6.5 meters), where the machine can be for example a small forestry machine or a tractor.
 
Strong and fast guillotine with two knife blades cuts a maximum of 20 cm.
 
The opening of the grapple is 82 cm and its geometry is excellent for loading. The guillotine blades are always automatically protected in their housing during loading, so loading is as easy as with a normal wood grapple.
 
201TE is equipped with a wireless controlled electric tilt. This ensures that the tree shear never tilts accidentally while the tree is still being cut. When loading trees, a significant advantage of the electric tilt is that the grapple can also be turned from a horizontal position to a vertical position. Moving wood materials vertically requires less working space and speeds up the work significantly.
 
The 201TE is equipped with a delimb blades, allowing the tree delimb using the lifting motion of the crane.
 
The 201TE is easy to install. The tree shear is attached to the rotator of the forest crane and 2pcs hydraulic hoses are connected just like installing a normal timber grapple. Tree shear already has a wireless receiver for the tilt function pre-installed at the factory. Only the wireless transmitter/micro switch is brought into the machine cabin and the micro switch controls the tilt function.
 
The most common machines for the 201TE are: Mini forest machines and tractors forest cranes under 6.5 meter reach